炼油中间油品罐区罐顶气治理

介绍了某石化厂炼油中间油品罐区10台储罐的罐顶挥发性有机物治理方案,改造方案是利用炼油厂现有瓦斯管网系统将其回收利用。包括罐顶油气收集管线和增压风机,并完善储罐氮封和安全附件。该方案需根据储罐的基本情况制定合理的压力控制方案和应急安全措施。该治理方案投资小,运行费用低,不仅取消了废气排放口,而且有较高的经济效益,可作为优先选用的炼油罐顶气治理方案。     

A review on China's wind power accommodation in the background of “Internet+” strategy

The consumption of fossil fuel has resulted in global warming, environmental pollution, and many other crucial problems. Replacing fossil fuel with renewable energy has become an important issue over the recent decades. As a renewable clean energy, wind power is a relatively well‐developed and promising energy method for current technology development in China. Under the background of growing demand for electricity and enhancing awareness for environmental, the “Internet+ wind power” concept has emerged based on both the wind power's characteristics that renewable and non‐polluting, and the rapid development of the Internet in China. Through querying an amount of literature and information, this paper reveals the resource endowment and policy environment about wind power and energy Internet at first. Then, the PEST‐SWOT strategy analysis model is used to analyze the internalities (strengths and weaknesses) and the externalities (opportunities and threats) of “Internet+ wind power”. According to these results, the paper puts forward some measures (development and utilization, business mode) for wind power accommodation. Then some policy recommendations have been proposed. The government should provide favorable conditions for wind power grid with the “Internet+” technology innovation.     

新型阶梯式浅吃水单立柱浮式风机平台水动力分析

常规的单立柱式(Spar)风力发电机平台,在水深较浅区域工作时,结构本身受吃水限制,工作效果较差。常规Spar重心较低,具有良好的稳定性,但是由于它往往具有超过100 m的吃水,因此使其不能应用于中近海域(水深小于100 m)。可设计研究一种适用于中国东海不超过100 m水深的中近海域新型浮式风机平台以解决此问题。针对NREL 5MW风机能应用于100 m水深的情况,对50 m吃水的新型Spar(SJTU-S4)及其系泊系统进行了概念设计研究。利用商业软件建立水动力模型,进行数值仿真,同时设计缩比模型试验,在上海交通大学海洋工程国家重点实验室(SKLOE)进行水动力性能测试。结果表明,本文研究的新阶梯式浅吃水单立柱浮式风机平台在100 m水深、多种海洋波浪环境下,通过试验和仿真验证,能够具有良好的运动响应,为风机提供较好的工作条件。     

基于LCOE最优的数字化风电场及其关键技术研究

数字化风电场是风电场综合利用数字化技术的新阶段。在分析风电场建设管理所面临的挑战的基础上，讨论了平准化度电成本（LCOE）的计算公式和内涵，给出了数字化风电场的定义，阐述了基于LCOE最优的数字化风电场的“风、机、场、网、环”五大特征以及数字化技术在降低LCOE中的作用。最后，总结了实现数字化风电场的风资源、大数据平台、数据分析建模、数字孪生和数据安全五大关键技术。     

复杂地形下风力机尾流数值模拟研究和激光雷达实验对比

以CFD数值计算和实验相结合的方法,对处于中国西南某多山地区陆上风电场的尾流特性进行研究,验证不同数值方法在复杂地形的适用性。首先采用2台激光雷达,测量目标风力机一个月内的自由来流风速和尾流廓线,在地形上坡加速效应下,不同大气稳定度下目标风力机的自由来流风速廓线均呈负梯度。然后分别采用经典致动盘和改进致动盘法,模拟目标风力机在主风向下的尾流发展。不同于只有风速与压降关系的经典致动盘法,改进致动盘法更考虑了叶片几何和气动参数(尺寸信息、攻角、桨距角、升阻力系数等)。通过与后置激光雷达尾流测试结果对比,这2种基于CFD技术的数值模拟方法,计算网格相同,计算时间相当,且均能较好地模拟因为复杂地形而引起的尾流偏转;其中改进致动盘的尾流形状与激光雷达相似,速度亏损也更接近激光雷达结果。因此,改进致动盘法更适合于复杂地形条件下风场模拟,较好平衡了计算的效率与精度。     

考虑CEEMDAN样本熵和SVR的短期风速预测

为降低由于风速信号的非线性和非平稳性带来的风速预测难度，提高短期风速预测的准确性，提出一种考虑样本熵的组合分解模式和支持向量回归（SVR）相结合的预测模型。首先采用自适应噪声的完全集合经验模态分解（CEEMDAN）方法分解风速历史数据，并计算各模态分量的样本熵；然后采用变分模态分解（VMD）方法对样本熵最大的模态分量进行二次分解，充分削弱风速分量的非平稳性；接着对分解得到所有模态分量分别建立SVR预测模型；最后将各分量的预测值求和完成最终风速预测。实例分析表明，所提模型对比其他模型的预测误差最小，预测精度最高，可有效预测短期风速。     

综采工作面巷道内瓦斯分布规律研究

为了研究综采工作面巷道内瓦斯运移规律，摸清瓦斯流动的状态，采用理论分析、数值模拟和现场试验相结合的方法，理论分析得到了工作面风流特性及瓦斯运移规律，数值模拟得到了瓦斯异常释放后工作面瓦斯浓度分布变化情况及工作面正常工作瓦斯浓度分布，然后进行现场试验，试验结果和数值模拟结果相似。研究为工作面瓦斯治理提供了技术支持。     

Vibration suppression for monopile and spar‐buoy offshore wind turbines using the structure‐immittance approach

Offshore wind turbines have the potential to capture the high‐quality wind resource. However, the significant wind and wave excitations may result in excessive vibrations and decreased reliability. To reduce vibrations, passive structural control devices, such as the tuned mass damper (TMD), have been used. To further enhance the vibration suppression capability, inerter‐based absorbers (IBAs) have been studied using the structure‐based approach, that is, proposing specific stiffness‐damping‐inertance elements layouts for investigation. Such an approach has a critical limitation of being only able to cover specific IBA layouts, leaving numerous beneficial configurations not identified. This paper adopts the newly introduced structure‐immittance approach, which is able to cover all network layout possibilities with a predetermined number of elements. Linear monopile and spar‐buoy turbine models are first established for optimisation. Results show that the performance improvements can be up to 6.5% and 7.3% with four and six elements, respectively, compared with the TMD. Moreover, a complete set of beneficial IBA layouts with explicit element types and numbers have been obtained, which is essential for next‐step real‐life applications. In order to verify the effectiveness of the identified absorbers with OpenFAST, an approach has been established to integrate any IBA transfer functions. It has been shown that the performance benefits preserve under both the fatigue limit state (FLS) and the ultimate limit state (ULS). Furthermore, results show that the mass component of the optimum IBAs can be reduced by up to 25.1% (7,486 kg) to achieve the same performance as the TMD.     

鲸鱼优化支持向量机的短期风电功率预测

为提高风电预测的精度,提出一种鲸鱼优化支持向量机SVM(support vector machine)的组合预测模型。该模型针对风电序列的非平稳波动特性,首先应用集合经验模态分解技术EEMD(ensemble empirical mode de?composition)将原始风电序列分解为一系列不同特征尺度的子序列;并引入鲸鱼优化算法WOA(whales optimiza?tion algorithm)解决SVM中学习参数选择难的问题,进而对各子序列建立WOA_SVM预测模型;最后,叠加各子序列的预测值以得到最终预测值。仿真表明,所提EEMD_WOA_SVM模型具有较高的风电预测精度,显著优于其他基本模型。     

Optimal siting and sizing of demand response in a transmission constrained system with high wind penetration

This paper describes algorithms that use demand-side management to address large-scale integration of wind power. In particular, demand response (DR) is used to manage wind power intermittency by shifting the time that electrical power system loads occur in response to real-time prices and wind availability. An economic dispatch with transmission, DR capacity and operational constraints is used to model the operation of a transmission constrained system with a high penetration of wind power. This optimization model is used to determine the optimal sizing and distribution of DR given a fixed budget for customer incentives and the installation of enabling technology. We demonstrate the effectiveness of the operational model based on a simple PJM 5-bus system and an IEEE 118-bus system. Simulation results show that transmission constraints have a greater effect on sizing of DR capacity than the location of wind power, which means that buses electrically close to congested lines tend to have higher incentives to deploy DR resources than other buses. The second part of the work examines optimal siting of technology that enables DR based on the frequency of DR based load changes, which are generally a function of the network location.